YX-C1

3D measurement points in the rod basic introduction

The world's fastest, the highest accuracy of CNC machine tools

Mainly used in: mold factory, metal factory, plastic factory, automobile manufacturing, aerospace, mining machinery such as CNC machine manufacture field.

It is the valuable parts of CNC machine tool production equipment, because this accessories expensive, slow speed, resulting in the purchase of equipment is the absence of accessories imported or domestic machine, machine tool accessories with the occasional scanty. Now the vast majority of manufacturers are using the traditional points in the rod ( edge detector ). The traditional tools of slow speed, low efficiency, bad precision and easy to bad, no measurement function.

Our company is specializing in the production of three coordinate measuring machine manufacturers, rich experience of more than ten years production of three coordinate measuring machine, we use three coordinates measuring head of the patent technology, 3D measurement in the production of bar, not only easily exceed the traditional tools, but also increased the product detection function. It is an essential tool for CNC CNC machining, as long as the boot work will use it every day, simple operation and long service life, high precision, fast in edge and measurement, and proficient teacher and novice, apprentice points, edge and the experimental results are consistent, unbiased, accuracy of ±0.001mm.

Even if the company did not purchase plan, the boss will be, because it is the low value consumable tool, for precision durable tools of high efficiency and to, and not the new equipment. Advanced tools and high automation production equipment should use advanced precision, achieve high efficiency to.

The company as long as it is with automatic measurement function, on-line products have quality assurance, will completely eliminate the quality accident products offline after.

Application: mainly used for machine tool equipment

· determine workpiece zero position.

· determine hole center location.

· determine and adjust the position of the workpiece.

3D measurement points in the rod: is an essential tool for CNC machine tools, as long as the boot work will use every day, it can completely replace the traditional points in the rod, and realize high precision fast, edge and measurement, and proficient teacher and novice, apprentice points, edge and the experimental results are consistent with no bias, precision± 0.001mm.

Function:

Edge searching function, quick points: compared to the traditional division of more than 6 times faster, many people use of edge results without deviation, accuracy of ±0.001mm.

·precision measurement function: measurement of mold open mouth and bottom taper. Hole coordinates, depth, length, width, angle, camber, measurement accuracy of ±0.001mm.

Characteristic.

Operation is convenient, fast and accurate.

·can be fast and accurate in measurement, edge, in the whole operating range; they can get rid of the machine error, ( operating results do not contain the machine error ).

·can independently control on machine tool.

·on all axes ( X, Y, Z ) can meet the machine using a range of requirements, can avoid the contact failure of rod damage.

·waterproof and shockproof, can be assured and the machine tool supporting the use of.

·tight metal shell, protection grade can reach IP67.

·probe 50 multiple choice, can change.

·induction:± X ±Y Z.

·repeatability precision: 0.3u =0.0003mm.

Advantage: contact use speed to reach the world level.